PT-24-95U Battery Charger “Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life. A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance. Features: * 24-volt model * “Smart” circuitry provides three-stage charging – bulk, absorption, float * Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages * Multiple isolated output banks; ammeter indicates total output current * The optional sensor adjusts output voltage based on battery temperature * Current limiting prevents damage from overloading * Use as a power supply; can power loads without a battery in line * Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry * Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield * Install in conjunction with PT-MCU for additional control and monitoring * ABS-type approval for battery charging and power supplies Specifications: * Input VAC (50-60 Hz.): 90-264 * Input Amps @ Full Load: @ 115 VAC: 26, @ 230 VAC: 14 * Power Factor: .98@115V and .95@230V * Max Output Amps: 95 * Output Banks: 3 * Battery Capacity (Amp-Hours): 180 – 950 * Operating Temp. Rating Reference: T-5 * Case Size Reference: A-5 * Case Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E add 2” (5.08 cm) to height and 1” (2.54 cm) to depth * Weight Lbs./Kg: 24.5/11 * Optional Temp. Sensor Model: TCS-12/24             * Remote Panel Model: RP * Compliance Reference: EN, CE, ABS Temperature Rating References: * Temperature: -20 degrees C to +70 degrees C * Derate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): * Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load * Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load Compliance References: * UL: UL 1950 (per DNB report) * CG: USCG CFR 183.410 (Ignition protected) * EN: EN 60335-1 * CE: Carries the CE mark * ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. Options: * Remote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.